Wilwood Bracket Spacer (Tubular) 0.50in LG 2.50 Offset - Black - 300-2089

Wilwood’s Tubular Bracket Spacers are used for spacing & offset changes on many applications available multiple diameters and lengths. Engineered from high strength aluminum alloy and finished with...

Wilwood Electronic Parking Brake Caliper Switch Kit w/ On/Off Sticker - 300-15936

Wilwood Electronic Parking Brake Caliper Switch Kit w/ On/Off Sticker

Wilwood Fitting Adaptor Brake Line Clip Bowed - 300-15780

Wilwood Fitting Adaptor Brake Line Clip Bowed

Wilwood Hub Shield 5x4.50/4.75/5.00 BC. w/ .625 c-bore on 5 x 5.00in - 300-15418

Wilwood Hub Shield 5x4.50/4.75/5.00 BC. w/ .625 c-bore on 5 x 5.00in

Wilwood 8.80in Diameter Dynapro Lug Rotor and Snap Ring Dynamic Kit - Stainless Steel - 300-14913

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 12 lug (8.80” Snap Ring) Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic...

Wilwood Dynamic Lug Rotor Mounting and Snap Ring Kit - 300-14912

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 12 lug (7.77’ Snap Ring) Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic...

Wilwood Clip Kit Pad Pin Retainer D8 / DP6/ TX6R / AERO - 300-14504

Convenient set of four or part # 310-3634, CLIP,RETAINING,PIN for DP6, D8, TX6 and Aero calipers.

Wilwood Adapter Rotor/Hat Register Ring 2.41in Dia. - 300-14232

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal...

Wilwood Bridge Bar Kit - GN6R 1.00 Thick Pad - 300-14219

Caliper Bridge Bar Kits contain bridge bar and hardware for replacement on GN6R calipers. Available in two pad widths types of GN6R: .80” and 1.00” thick. Engineered from high strength aluminum...

Wilwood Bridge Bar Kit - GN6R 0.80 Thick Pad - 300-14218

Caliper Bridge Bar Kits contain bridge bar and hardware for replacement on GN6R calipers. Available in two pad widths types of GN6R: .80” and 1.00” thick. Engineered from high strength aluminum...

Wilwood Spacer Pushrod Wilwood Tandem Master Cylinder - 300-13885

Push Rod Spacer for use in Wilwood’s Aluminum Tandem Master Cylinder. Used when a deep whole push rod retention is not required. Used with most power brake applications. With a 1.62” length, .468”...

Wilwood Adapter Rotor/Hat Register Ring 2.80in Dia. - 300-13741

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal...