Wilwood Spacers For Rear Disc/Drum Kits .732in Aluminum - 300-9506

Individual spacers for Wilwood’s Internal Drum Parking Brake brackets. Used to set kit brackets to specific axle offsets. Spacers are made from high strength aluminum alloy. Spacers widths will vary...

Wilwood Tubular Bracket Spacer - .470 LG - 300-9491

Wilwood’s Tubular Bracket Spacers are used for spacing & offset changes on many applications available multiple diameters and lengths. Engineered from high strength aluminum alloy and finished with...

Wilwood 0.215 Large Caliper Spacer - Black - 300-8764

Wilwood’s Tubular Bracket Spacers are used for spacing & offset changes on many applications available multiple diameters and lengths. Engineered from high strength aluminum alloy and finished with...

Wilwood Retaining Pin - Powerlite .35/.50 & .79/.86 Rotor - Each - 300-8697

Pad Retaining Clip used in all Powerlite and PL2R calipers in all rotor widths currently available. Plated steel construction.

Wilwood Dynamic Rotor Adapter 8x7.00BC 8x7.00BC Wide 5 Hub - 300-8431

Replacement Floating Rotor Adapter for Wilwood’s Starlite 5 / 55 Dynamic Rotor Hubs. 8 x 7.00” bolt circle. Made from alloy steel and plated for corrosion resistance. Use 230-8454 Rotor Bolt and...

Wilwood Coated T-Nut 1/4-28 Rotor .03 Offset - HTN - 300-8429

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These solid steel t-nuts are available in different thickness and bolt hole sizes.

Wilwood Spindle Bracket Bolt Sleeve - .479 OD x .386 ID x .388 L - 300-8406

Spindle Bracket Bolt Sleeve. With a .386” ID, .479” OD and .388" length. Made from high strength steel alloy.

Wilwood Pad Shim kit DL NDL Dynapro Dynapro Radial Pads - 300-8259

Wilwood’s Pad Shim Kits feature a steel and elastomeric construction that dampens vibration transmitted between the rotor and pad. This is an industry standard to reduce NVH (Noise, Vibration and...

Wilwood Hub Shield M/D H/D Hubs-5x4.00/4.50/4.75 BC. - 300-7500

Wheel Spacer and Hub Protector. With a wheel bolt circle of 5 x 4.00”/4.50”/4.75” and a .090 thickness. Engineered from high strength steel alloy and with a plated finish.

Wilwood Retaining Pin - Dynapro Radial / DP6 ..81in / 1.00in / 1.10in Rotor - Each - 300-7316

Pad Retaining Clip used in first generation DP6 Calipers with .810 - 1.10” width rotors and current DPR calipers with .810 – 1.00” rotor widths. Plated steel construction.

Wilwood Retaining Pin - Dynapro Radial / DP6 .38in / .50in Rotor - Each - 300-7315

Pad Retaining Clip used in first generation DP6 Calipers with .380” width rotors and current DPR calipers with .375-.500” rotor widths. Plated steel construction.

Wilwood Dynamic Rotor Adapter 8x7.00BC 5x4.875BC 5x5 Hub - 300-7107

Floating Rotor Adapter for Asphalt Racing Hubs with “backside” mounts. With a hub mount bolt circle of 5 x 5.00” and will mount any 8 x 7.00” bolt circle rotor. Made from high strength aluminum alloy...