2v 4.6/5.4 Custom Cams by TW Cams

Custom spec'd cams that take advantage of your current and/or future modifications in order to meet your power and performance goals. These cams may take longer than receive than shelf cams and because most of the custom cams have unique specs there is a...

2v 4.6/5.4 TFS Cylinder head Custom Cams by TW Cams

Custom spec'd cams that are ground to work with the unique intake valve position and reversed intake cam follower of the TFS heads. Your current and/or future modifications in order to meet your power and performance goals. With the TFS 150lb springs we...

3V 4.6/5.4 Custom Cams by TW Cams

These camshafts will have the specs (LSA, ILC, duration and lift)  that are determined to best match your vehicles modifications and meet your power, performance, and idle sound goals.These can be designed to use stock or aftermarket valve...

3V Replacement Camshaft By TW Cams

These camshafts will be ground to match exact specs of the camshaft that is is replacing.  We will need either a cam card or the serial numbers that are etched on the cams in order to ensure the replacement is exactly what you need.

4V 4.6/5.4 Custom Cams by TW Cams

These camshafts will have the specs (LSA, ILC, duration and lift) that are determined to best match your vehicles modifications and meet your power, performance, and idle sound goals. Because most custom cams have unique specs there is a 15%...

4V replacement camshaft

This link is for replacement camshafts. These cams cane be ground to match any camshafts from Comp Cams, Lunati and Bullet Cams.  Preferrably a cam card from your cam set is desired, but we can also use the camshaft serial numbers to determine the...

7.3 Godzilla Custom camshaft by TW Cams

These cams are spc'd to match your engine and vehicle modifications and to meet your performance and power goals.  Both Solid and Hyd rollers are available as are cams that can be used with phasers having a full range of motion as well as those that...

BPS Camshaft Sensor Block-Offs (2011-2021 Mustang)

These billet pieces will fill the void left when the cam sensors are deleted for aftermarket ECU’s.  Simply installed like factory. Features: Durable hard black anodize finish OEM like o-ring seal Easy installation Sold in a quantity of four (4)...

Camshaft Retention Washer & Spacers, 4V

Camshaft Retention Washer and Spacers are for the Ford 4V Modular Motor and fits 4.6L, 5.4L and 5.8L engines. Accufab manufactures many tough, reliable and useful products for our own high performance engine building needs. Now, we are offering these...

Ford V-10 Custom cams by Todd Warren

These cams are ground on new, billet cores and the spec's will be determined by your engine and vehicle mods and power and performance goals.Cancellations require  Cam Spec Sheet

Ford, Custom Hydraulic/Solid Roller Cams by TWCAMS

The cam specs will be spec'd to match the engine and driveline modifications and to also meet your power and performance goals. Cam Spec Sheet

Gen 1 Coyote Custom Cams by TW Cams

Custom spec'd cams that take advantage of your current and/or future modifications in order to meet your power and performance goals.Because most of the custom cams have unique specs, they may take longer than receive than shelf cams and once ordered...