2v 4.6/5.4 Custom Cams by TW Cams

Custom spec'd cams that take advantage of your current and/or future modifications in order to meet your power and performance goals. These cams may take longer than receive than shelf cams and because most of the custom cams have unique specs there is a...

2v 4.6/5.4 TFS Cylinder head Custom Cams by TW Cams

Custom spec'd cams that are ground to work with the unique intake valve position and reversed intake cam follower of the TFS heads. Your current and/or future modifications in order to meet your power and performance goals. With the TFS 150lb springs we...

ARP Ford 4.6L V8 Cam Sprocket Bolt Kit (Single Bolt) - 256-1001

ARP Ford 4.6L V8 Cam Sprocket Bolt Kit (Single Bolt)

Boundary 99-05 Ford Modular Motor 4V V8 Billet Crankshaft Timing Sprocket - MM-SP-4V

Boundary 99-05 Ford Modular Motor 4V V8 Billet Crankshaft Timing Sprocket

Boundary 99-05 Ford Modular Motor 4V V8 Billet Crankshaft Timing Sprocket w/Adjustable Keyway - MM-SP-4V-K

Boundary 99-05 Ford Modular Motor 4V V8 Billet Crankshaft Timing Sprocket w/Adjustable Keyway

Comp Cams 4.6/5.4 Tpx 262HR - 102535

Optimized combination for power and torque with acceptable fuel economy for daily driver or highway cruiser. Requires tuning.   Can use stock springs. Advertised Intake Duration 261 Advertised Exhaust Duration 267 Intake Duration at .050 Inch...

Comp Cams 4.6/5.4 XE262Bh-16 - 102560

Except for their wider LSA, these are the same as the 102500s.  These would be great for a mild supercharger setup where a smooth idle is desired. Xtreme Energy™ Blower 226/230 Hydraulic Roller Finger Follower Cams for Ford 4.6/5.4L Modular 2...

Comp Cams 4.6/5.4 Tpx 248HR - 102525

These cams are great for a very mild, auto trans build with a stock tq converter.   Good MPG can be expected, but with a loss of peak power.  Tq will be maintained and as such, these will be good for a mildy modded truck...

Comp Cams 4.6/5.4 XE262Ah-13 - 102500

These are the best cam set for a mild, mustang street build.  The peak power is similar to the 270s, but midrange power is a lot greater.  Expect a mildly choppy idle. Xtreme Energy™ 226/230 Hydraulic Roller Finger Follower Cams for Ford...

Comp Cams 4.6/5.4 XE268H-14 - 102200

These cams are designed for NPI heads as their lower lift does not result in any valvetrain binding.  They can be used in PI heads, but the power will suffer due having only .500 lift. Xtreme Energy™ 230/236 Hydraulic Roller Finger Follower...

Comp Cams 4.6/5.4 XE270AH-13 - 102600

The are a great cam set for those wanting an increase in upper RPM power without regard to low and midrange losses.  They require 3.73 to 4.10 gears for the best performance.  The idle will be choppy. Xtreme Energy™ 234/238 Hydraulic...

Comp Cams 4.6/5.4 XE274H-14 - 102300

These are a moderately aggressive cam set for NPI heads due to their .500" lift limit.  We do no recommend these for PI heads.   Xtreme Energy™ 236/240 Hydraulic Roller Finger Follower Cams for Ford 4.6/5.4L Modular 2 Valve. Hot...