Comp Cams 4.6/5.4 Tpx 248HR - 102525

These cams are great for a very mild, auto trans build with a stock tq converter.   Good MPG can be expected, but with a loss of peak power.  Tq will be maintained and as such, these will be good for a mildy modded truck...

Comp Cams 4.6/5.4 XE262Ah-13 - 102500

These are the best cam set for a mild, mustang street build.  The peak power is similar to the 270s, but midrange power is a lot greater.  Expect a mildly choppy idle. Xtreme Energy™ 226/230 Hydraulic Roller Finger Follower Cams for Ford...

Comp Cams 4.6/5.4 XE268H-14 - 102200

These cams are designed for NPI heads as their lower lift does not result in any valvetrain binding.  They can be used in PI heads, but the power will suffer due having only .500 lift. Xtreme Energy™ 230/236 Hydraulic Roller Finger Follower...

Comp Cams 4.6/5.4 XE270AH-13 - 102600

The are a great cam set for those wanting an increase in upper RPM power without regard to low and midrange losses.  They require 3.73 to 4.10 gears for the best performance.  The idle will be choppy. Xtreme Energy™ 234/238 Hydraulic...

Comp Cams 4.6/5.4 XE274H-14 - 102300

These are a moderately aggressive cam set for NPI heads due to their .500" lift limit.  We do no recommend these for PI heads.   Xtreme Energy™ 236/240 Hydraulic Roller Finger Follower Cams for Ford 4.6/5.4L Modular 2 Valve. Hot...

Comp Cams 4.6/5.4 XE278Ah-13 - 102700

These are the most aggressive of the Comp 2v offerings.  4.30-4.56 gears are recommended and if used with an auto trans, a 4k stall or higher will be required.Xtreme Energy™ 242/246 Hydraulic Roller Finger Follower Cams for Ford 4.6/5.4L...

COMP Cams Socket For CS Crank - 4793CPG

The COMP crankshaft socket for Chevrolet Small Block, 90 degree V6, GM 4 cyl and Ford 4.6 is the last crankshaft socket that you'll need. Featuring a 1/2" drive socket and a knurled nut, our socket is designed for use with a degree wheel.CatalogUser 1

COMP Cams Steel Retainers 7Deg 26113 St - 792-16

Precision machined from chromemoly steel then black oxided, these 7 degree retainers are designed specifically for 26113 Beehive springs on Ford 4.6 2 Valve applications.CatalogUser 1This Part...

COMP Cams Ti Retainers Stock Height 7De - 791-16

Precision machined from 6AL4V titanium, these retainers feature better material consistency and bullet proof durability. These 7 degree retainers fit Ford 4.6L 2 Valve engines with our 26123 Beehive valve springs.CatalogUser 1

COMP Cams Valve Spring H/L Ford 2V Beeh - 26125-16

Race Street 1.101" OD Beehive Springs; 1.640" Installed Height; 16 SpringsCatalogUser 1

COMP Cams Valve Springs Ford 4.6L 2 Valve - 26113-16

Performance Street 1.061" OD Beehive Spring; 1.570" Installed Height; 16 SpringsCatalogUser 1This Part Fits:YearMakeModelSubmodel1997-2000FordE-150 EconolineBase1997-2000FordE-150 EconolineXL1997-2000FordE-150 Econoline Club...

Ford Racing 4.6L 2V Camshaft Drive Kit - M-6004-462V

Ford Racing camshaft drive kits include all of the components that you need for proper timing. They're offered for a choice of applications and include high-quality production components for increased durability.Installation Instructions