Edelbrock 1 1/4 PCV Grommets 1Pr - 8094

One pair of valve cover PCV grommets. Fits standard 1-1/4" diameter valve cover holes. The i.d. is .75" to fit many common PCV valves. The rubber durometer was chosen to give a firm snug leak free fit.Warranty

Edelbrock 1-Inch 4500 Carb Spacer - 8717

The Edelbrock Carburetor Spacer #8718 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8718 cloverleaf, aluminum, open spacer is 1" thick and works with Edelbrock 4500 Series...

Edelbrock 1-Inch Cloverleaf Carb Spcr - 8718

The Edelbrock Carburetor Spacer #8719 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8719 is 3/4" thick and made of wood fiber laminate. The superior heat insulating properties of...

Edelbrock 1-Inch Wood Spacer - 8720

The Edelbrock Carburetor Spacer #8720 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8720 is 1" thick and made of wood fiber laminate. The superior heat insulating properties of...

Edelbrock 1/2-Inch DIVided Wood Spac - 8725

The Edelbrock Q-Jet Carburetor Spacer #8726 4-hole design enhances low-rpm torque and throttle response and dampen reversion effects on the carb. The Edelbrock #8726 spacer is 3/4" thick and made of wood fiber laminate. The superior heat insulating...

Edelbrock 1/2-Inch Open Wood Spacer - 8724

The Edelbrock Carburetor Spacer #8724 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8724 is 1/2" thick and made of wood fiber laminate. The superior heat insulating properties of...

Edelbrock 1/4 Ball End Stud - 8016

Edelbrock #8016 1/4" Ball End throttle stud ? ??Warranty

Edelbrock 1910 Rebuild Kit - 1990

The Edelbrock #1990 Q-Jet rebuild kit is a complete set of gaskets and seals needed to rebuild Edelbrock Quadra jet carburetors part #1910 and M4M Q-Jets (1975 and Older)Installation InstructionsWarrantyInstallation Instructions

Edelbrock 3/4-Inch Wood Spacer - 8719

The Edelbrock Carburetor Spacer #8719 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8719 is 3/4" thick and made of wood fiber laminate. The superior heat insulating properties of...

Edelbrock 351-M Choke Block Off - 8971

The Edelbrock #8971?Choke Block-Off Small Block Ford 351M/ 400M for #2171, #3711 Intake ManifoldWarranty

Edelbrock 351-w/ 351-C 2V Bk Off - 8981

The Edelbrock?Choke Block-Off for Small Block Ford 351W/ 351C ?Intake ManifoldsWarranty

Edelbrock 4 3L Marine Cal Kit - 1485

Edelbrock Marine Series 1409 carburetor calibration kit when installed on a 4.3L 90 Deg V6Warranty