Wilwood Pad Wear Plate -FSL/SL 4/6-L/H - 300-5923

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet...

Wilwood Pad Wear Plate -FSL/SL 4/6-R/H - 300-5922

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet...

Wilwood Pad Wear Plate - NDL - 300-5876

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet...

Wilwood Pad Wear Plate - DL/DLS - 300-5875

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet...

Wilwood Sintered Steel T-Nut Rotor Dynamic Rear - 300-5806

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.

Wilwood Sintered Steel T-Nut Rotor Dynamic Front - SS - 300-5804

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.

Wilwood Sintered Steel T-Nut Rotor 0.216in Width 0.251in Thread - 300-5507

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.

Wilwood Caliper Bridge Spacer .44 Thick - 300-4919

Caliper Bridge Spacer for Forged Dynalite / Billet Dynalite and NDL Calipers. Available in various thicknesses for .50” thru 1.25” rotor widths. Made from high strength aluminum alloy.

Wilwood Front Rotor Adapter - 10.75in x 6 Bolt Rotor - 300-3307

Rotor adapter for Wilwood’s Pro Street and Drag hubs. Adapter is supplied with a 5 x 3.88” bolt circle pattern for hub mounting and a 6 x 6.25” bolt pattern for rotor mounting. Made from high...

Wilwood Front Rotor Adapter - 11.75in x 8 Bolt Rotor - 300-3099

Rotor adapter for Wilwood’s Pro Street and Drag hubs. Adapter is supplied with a 5 x 3.88” bolt circle pattern for hub mounting and a 8 x 7.00” bolt pattern for rotor mounting. Made from high...

Wilwood Pad Wear Plate - GNIII - 1.38in Rotor - 300-3053

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used with...

Wilwood Caliper Piston Spring .77/1.22 ODx1.00 - 300-2434

Caliper Piston Knock Back Springs. Used in low brake pedal situations due to piston knock back caused by vibration, mount or spindle flex. Part # 300-2434 (1.22” diameter) is used with Wilwood’s...