BPS Coyote VCT Lockout kits

state what Gen you want in the notes when placing the order.CNC machined 6061-T6 aluminum lockouts for 2011-2023 Coyote. Does not include hardware. Features: CNC machined 6061-T6 Black Anodized finish Cam positioning pin

Cobra Engineering Tensioner

The stock Ford tensioner on the passenger side puts tension on the driven side on the passenger side. This allows for a variation in intake cam timing. This tensioner body swaps the piston 180* to apply tension the slack side. This requires the...

Comp Cams 4.6/5.4 Tpx 262HR - 102535

Optimized combination for power and torque with acceptable fuel economy for daily driver or highway cruiser. Requires tuning.   Can use stock springs. Advertised Intake Duration 261 Advertised Exhaust Duration 267 Intake Duration at .050 Inch...

Comp Cams 4.6/5.4 XE262Bh-16 - 102560

Except for their wider LSA, these are the same as the 102500s.  These would be great for a mild supercharger setup where a smooth idle is desired. Xtreme Energy™ Blower 226/230 Hydraulic Roller Finger Follower Cams for Ford 4.6/5.4L Modular 2...

Comp Cams 4.6/5.4 Tpx 248HR - 102525

These cams are great for a very mild, auto trans build with a stock tq converter.   Good MPG can be expected, but with a loss of peak power.  Tq will be maintained and as such, these will be good for a mildy modded truck...

Comp Cams 4.6/5.4 XE262A - 106100

These are a graet cam set for a mildy modded vehicle that where low and midrange power is desired. With a manual trans and headers you can expect power in the 350rwhp range.   More Information UPC 036584096399 Manufacturer COMP...

Comp Cams 4.6/5.4 XE262A - 106300

This is a good cam set for mild setup where a relatively smooth idle and good vacuum is desired. Xtreme Xtreme Energy™-R 226/224 Hydraulic Roller Finger Follower Cams for Ford 4.6/5.4/5.8L Modular 4 Valve Xtreme XE-R 226/224 Hydraulic Roller Finger...

Comp Cams 4.6/5.4 XE262Ah-13 - 102500

These are the best cam set for a mild, mustang street build.  The peak power is similar to the 270s, but midrange power is a lot greater.  Expect a mildly choppy idle. Xtreme Energy™ 226/230 Hydraulic Roller Finger Follower Cams for Ford...

Comp Cams 4.6/5.4 XE266B - 106160

These are the most aggressive of the stock spring capable options. We recommend at least a 4.10 rear gear and a manual trans.  Xtreme RPM 230/230 Hydraulic Roller Finger Follower Cams for Ford 4.6/5.4/5.8L Modular 4 Valve Xtreme RPM 230/230...

Comp Cams 4.6/5.4 XE266B - 106360

These cams are good for a moderate to high power supercahrged or nitrous build.  Expect good power to 7500 with high boost. Can be used in n/a setups also if more peak power is desiredd without adding Requires valve springs. Xtreme Energy™-R...

Comp Cams 4.6/5.4 XE268H-14 - 102200

These cams are designed for NPI heads as their lower lift does not result in any valvetrain binding.  They can be used in PI heads, but the power will suffer due having only .500 lift. Xtreme Energy™ 230/236 Hydraulic Roller Finger Follower...

Comp Cams 4.6/5.4 XE270A - 106200

These cams are a good set for a moderately modded vehicle. They require at leaast 4.10 gears as low and midrange power will be reduced.  Also, they are stock spring capable.   Advertised Intake Duration 269 Advertised Exhaust...