Edelbrock Str Tunnel Ram 396-454 Manifold - 7115

Edelbrock part #7115 Street Tunnel Ram 2-O intake manifold is designed for use on 396-502 c.i.d. big-block Chevy V8's with large oval-port heads (1975 and earlier). Ideal for applications such as pro-street or marine where low-end torque is not a prime...

Edelbrock Super Victor 4500 23 Manifold - 2970

Edelbrock part #2970 Super Victor 4500 23 degree standard port location intake manifold is designed for small-block Chevys with 4500 Series carburetors and 23 degree heads. This intake manifold has a large runner cross-sectional area (3.2 square inches)...

Edelbrock Super Victor 4500 Raised Rnr Man - 2971

Edelbrock part #2971 Super Victor 4500 23 degree raised port intake manifold is designed for small-block Chevys with 4500 Series carburetors and 23 degree heads. This intake manifold has a large runner cross-sectional area (3.2 square inches) and a...

Edelbrock Super Victor BBC Manifold - 2927

Edelbrock part #2927 Super Victor BBC intake manifold is designed for Chevy big-blocks with rectangular port cylinder heads. This single-plane manifold is ideal for 500+ cubic-inches or any big-block drag race engine with high air flow requirements. In...

Edelbrock Super Victor BBC Tall Deck Manifold - 2916

Edelbrock part #2916 Super Victor BBC Tall-Deck intake manifold is designed for Chevy big-blocks with rectangular port cylinder heads. This single-plane manifold is ideal for 500+ cubic-inches or any big-block drag race engine with high air flow...

Edelbrock Super Victor Manifold SB-Chevy - 2925

Edelbrock part #2925 Super Victor 23-degree intake manifold is designed for heads with a standard port location, the runners match the "flat floor" entry of the latest 23-degree heads. Carb pad height is 5-1/2" (from end seals) and overall, this intake...

Edelbrock Super Victor SBC Manifold for GM Cast Iron Vortec Heads (Race Manifold) - 2814

Edelbrock part #2814 Super Victor Vortec Bowtie intake manifold is designed specifically for use with GM cast-iron Vortec Bowtie cylinder heads #25534351 (185cc) and #25534371 (215cc). It features raised runners that closely match the port shape and...

Edelbrock Torker II 2-O Manifold - 5061

Edelbrock part #5061 Torker II 2-O intake manifold is designed for street 396-502 c.i.d. Chevy V8's with large oval-port cylinder heads (1975 and earlier). Manifold not equipped with EGR. Will not fit "tall block" V8 engines. The Torker II 2-O intake...

Edelbrock Torker II 302 Manifold - 5021

Edelbrock part #5021 Torker II 302 intake manifold is designed for street 289-302 c.i.d. Ford V8's. Will not fit Boss 302. Manifold not equipped with EGR. Will not fit 255 c.i.d. Ford V8 engines. Not for heavy vehicles. Edelbrock carbs will work with...

Edelbrock Torker II 351-W Manifold - 5081

Edelbrock part #5081 Torker II 351W intake manifold is designed for 1969 and later 351 Windsor Ford V8 high-performance engines with Edelbrock heads, OEM 12- or 16-bolt heads or equivalent. Will not fit "Boss 351" Cleveland. Manifold not equipped with...

Edelbrock Torker II 360 Manifold - 5076

Edelbrock part #5076 Torker II intake manifold is designed for high Performance's street 340-360 c.i.d. Chrysler V8's. Manifold not equipped with EGR. Can be used on 318 c.i.d. if 340-360 c.i.d. cylinder heads are used. Will not fit 1992 and later Magnum...

Edelbrock Torker II 440 Manifold - 5091

Edelbrock part #5091 Torker II 440 intake manifold is designed for street 413-426-440 c.i.d. Chrysler V8's. They measure 8.75" across block. Manifold not equipped with EGR. Will not fit 1962-64 Max Wedge heads.Installation InstructionsInstallation...