Supertech/Apocalypse 4v springs for stock retainers - (32 springs)

This is a set of 32 springs that are good for use in most street cars and many race cars.  They are good for 30psi and are a very affordable option for most boosted and n/a 4v engines.Ford Modular 4.6L 4v Beehive Single spring OD 1.075"/...

Timing Chains 5.4L - Ford Mustang

Standard Ford 5.4L 2V or 4V OEM style replacement chains. Sold as a set with two primary chains. Note: This chain set doesn't fit the GT500. Mod Motor Trivia: The Ford Modular engine is Ford Motor Company's overhead camshaft (OHC) V8 and V10...

Trick Flow Cam Degree Supplemental Kit

Now you can have perfect timing for your 4.6/5.4L Ford with these Trick Flow® cam degree supplemental kits. These supplemental kits are additional tools that, when used with a Trick Flow® cam degree kit, make degreeing your cam much easier! These...

Trick Flow Hydraulic Lifters and Lash Adjusters TFS

Trick Flow® hydraulic lifters and lash adjusters are the perfect choice to freshen up your engine during a cam swap. These affordable lifters and adjusters are designed to factory tolerances for a perfect fit and provide precise oil control to keep...

Trick Flow steel valve spring retainers for TFS 150lb springs Steel -8ea

These are supplied in sets of 16ea only fit the TFS 150lb springs for TFS heads, PN TFS-16521-16/ Trick Flow® steel valve spring retainers are made from hardened 4140 chromoly steel for great performance characteristics and reliability. On top of...

Trick Flow TFS 3v (12ea) Hydraulic Lifters and Lash Adjusters

requires 2ea sets, one for each head Lifter Style: Hydraulic lash adjuster Lifter Link Bars Included: No Lifter Outside Diameter (in.): 0.629 in. Lifter Offset: None Quantity: Sold as a set of 12. Notes: Fits 3V Ford modular engines only; does not fit...

Trick Flow® Cam Bolts TFS-51800508

Trick Flow® Cam Bolts These Trick Flow® cam bolts are designed for aftermarket and oe 2v and 4v camshafts that require 12mm bolts. These cam bolts are made from quality-grade 10.9 steel with a black finish. These cam bolts are a great choice when...

Trick Flow® Cam Degree Kit TFS

Trick Flow’s Cam Degree Kit will help dial in a camshaft accurately. In addition, the degree kits can also be used to check piston-to-valve clearance, flywheel runout, crankshaft endplay, and ring gear backlash. The 11 inch diameter black degree...

Trick Flow® Cam Degree Supplemental Kit Replacement Parts

Get your engine back into correct timing with these Trick Flow® cam degree supplemental kit replacement parts. From magnetic bases to indicator extensions, Trick Flow® has you covered.

Trick Flow® Cam Spacers TFS-51800503

Trick Flow® Cam Spacers Trick Flow® patented hex cam gear spacers are great for holding the cam in position when you're setting the cam timing and torquing the cam gear bolts.

Trick Flow® Replacement Adjustable Crank Sprockets TFS-51800505

Use these on your crankshaft to adjust the cams up to 8 degrees in 2 deg increments. These crank sprockets are machined from billet steel for durability. These crank sprockets are also adjustable for fine-tuning your modular engine. Warranty

Trick Flow® Replacement Timing Gears TFS-51800502

Trick Flow® Replacement Timing Gears Trick Flow® replacement timing gears are designed from high quality materials for performance 2 V modular engines. Since they're interference engines, timing component wear can ruin your day. That's why Trick...