Wilwood Sintered Steel T-Nut Rotor 0.216in Width 0.251in Thread - 300-5507

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.

Wilwood Caliper Bridge Spacer .44 Thick - 300-4919

Caliper Bridge Spacer for Forged Dynalite / Billet Dynalite and NDL Calipers. Available in various thicknesses for .50” thru 1.25” rotor widths. Made from high strength aluminum alloy.

Wilwood Front Rotor Adapter - 10.75in x 6 Bolt Rotor - 300-3307

Rotor adapter for Wilwood’s Pro Street and Drag hubs. Adapter is supplied with a 5 x 3.88” bolt circle pattern for hub mounting and a 6 x 6.25” bolt pattern for rotor mounting. Made from high...

Wilwood Front Rotor Adapter - 11.75in x 8 Bolt Rotor - 300-3099

Rotor adapter for Wilwood’s Pro Street and Drag hubs. Adapter is supplied with a 5 x 3.88” bolt circle pattern for hub mounting and a 8 x 7.00” bolt pattern for rotor mounting. Made from high...

Wilwood Pad Wear Plate - GNIII - 1.38in Rotor - 300-3053

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used with...

Wilwood Caliper Piston Spring .77/1.22 ODx1.00 - 300-2434

Caliper Piston Knock Back Springs. Used in low brake pedal situations due to piston knock back caused by vibration, mount or spindle flex. Part # 300-2434 (1.22” diameter) is used with Wilwood’s...

Wilwood Bracket Spacer (Tubular) 0.50in LG 2.50 Offset - Black - 300-2089

Wilwood’s Tubular Bracket Spacers are used for spacing & offset changes on many applications available multiple diameters and lengths. Engineered from high strength aluminum alloy and finished with...

Wilwood Fitting Adaptor Brake Line Clip Bowed - 300-15780

Wilwood Fitting Adaptor Brake Line Clip Bowed

Wilwood Hub Shield 5x4.50/4.75/5.00 BC. w/ .625 c-bore on 5 x 5.00in - 300-15418

Wilwood Hub Shield 5x4.50/4.75/5.00 BC. w/ .625 c-bore on 5 x 5.00in

Wilwood Dynamic Lug Rotor Mounting and Snap Ring Kit - 300-14912

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 12 lug (7.77’ Snap Ring) Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic...

Wilwood Clip Kit Pad Pin Retainer D8 / DP6/ TX6R / AERO - 300-14504

Convenient set of four or part # 310-3634, CLIP,RETAINING,PIN for DP6, D8, TX6 and Aero calipers.

Wilwood Adapter Rotor/Hat Register Ring 2.41in Dia. - 300-14232

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal...