Wilwood Fitting Adaptor Brake Line Clip Bowed - 300-15780

Wilwood Fitting Adaptor Brake Line Clip Bowed

Wilwood Hub Shield 5x4.50/4.75/5.00 BC. w/ .625 c-bore on 5 x 5.00in - 300-15418

Wilwood Hub Shield 5x4.50/4.75/5.00 BC. w/ .625 c-bore on 5 x 5.00in

Wilwood 8.80in Diameter Dynapro Lug Rotor and Snap Ring Dynamic Kit - Stainless Steel - 300-14913

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 12 lug (8.80” Snap Ring) Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic...

Wilwood Dynamic Lug Rotor Mounting and Snap Ring Kit - 300-14912

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 12 lug (7.77’ Snap Ring) Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic...

Wilwood Clip Kit Pad Pin Retainer D8 / DP6/ TX6R / AERO - 300-14504

Convenient set of four or part # 310-3634, CLIP,RETAINING,PIN for DP6, D8, TX6 and Aero calipers.

Wilwood Spacer Pushrod Wilwood Tandem Master Cylinder - 300-13885

Push Rod Spacer for use in Wilwood’s Aluminum Tandem Master Cylinder. Used when a deep whole push rod retention is not required. Used with most power brake applications. With a 1.62” length, .468”...

Wilwood Adapter Rotor/Hat Register Ring 2.28in Dia. - 300-12846

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal...

Wilwood Adapter Rotor/Hat Register Ring 2.44in Dia. - 300-12761

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal...

Wilwood Rotor Adaptor Floating - Sprint Hub 8x7.00 BC Gen II (3.37 x 2.28) - 300-12582

Rotor adapter for Wilwood’s GEN II Sprint / Midget inboard hubs. Adapter is supplied with a rectangular 3.37” x 2.28” pattern for hub mounting and a dual 8 x 7.00” dynamic or fixed bolt pattern for...

Wilwood Rotor Adaptor Floating - Sprint / Midget Hub 6x5.50 BC Gen II (3.37 x 2.28) - 300-12581

Rotor adapter for Wilwood’s GEN II Sprint / Midget inboard hubs. Adapter is supplied with a rectangular 3.37” x 2.28” pattern for hub mounting and a dual 6 x 5.50” dynamic or fixed bolt pattern for...

Wilwood Kit Snap Ring (1) and Wear Plates (8) Dynamic Drag Rotor - 300-12561

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 8 lug Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic Lug Mount system.

Wilwood Hub Shield 5mm (0.19in) Thick 5 x 4.50/4.75/5.00 - 300-11961

Wheel Spacer and Hub Protector. With a wheel bolt circle of 5 x 4.50”/4.75”/5.00” and a 5mm (0.197’) thickness. Engineered from high strength steel alloy and with a plated finish.