Eibach Pro-Spacer 25mm Spacer / Bolt Pattern 5x127 / Hub Center 71.5 for 07-16 Jeep Wrangler (JK) - S90-4-25-013

Made from lightweight Neoprene material, Eliminates mud packing inside coils, Keeps spring adjuster and damper shaft clean for extended life, Easy Velcro split opening for shock & spring adjustment, Washable materialThis Part...

Eibach Pro-Spacer 27mm Spacer / Bolt Pattern 5x127 / Hub Center 71.5 for 07-16 Jeep Wrangler (JK) - S90-4-27-001

Made from lightweight Neoprene material, Eliminates mud packing inside coils, Keeps spring adjuster and damper shaft clean for extended life, Easy Velcro split opening for shock & spring adjustment, Washable materialThis Part...

Eibach Pro-Spacer 30mm Front Spacer / Bolt Pattern 5x114.3 / Hub Center 70.5 for 05-14 Ford Mustang - S90-4-30-019

When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!This Part...

Eibach Pro-Spacer 30mm Rear Spacer / Bolt Pattern 5x114.3 / Hub Center 70.5 for 05-14 Ford Mustang - S90-4-30-020

When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!This Part...

Eibach Pro-Spacer 30mm Spacer / 6x139.7 Bolt Pattern / Hub Center 110 for 87-04 Nissan Pathfinder - S90-8-30-003

Made from lightweight Neoprene material, Eliminates mud packing inside coils, Keeps spring adjuster and damper shaft clean for extended life, Easy Velcro split opening for shock & spring adjustment, Washable materialThis Part...

Eibach Pro-Spacer 30mm Spacer / Bolt Pattern 4x100 / Hub Center 54 for 07-11 Toyota Yaris - S90-4-30-021

Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of...

Eibach Pro-Spacer 30mm Spacer / Bolt Pattern 4x108 / Hub Center 63.3 for 00-07 Ford Focus - S90-4-30-003

Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of...

Eibach Pro-Spacer 30mm Spacer / Bolt Pattern 4x98 / Hub Center 58 for 12-18 Fiat 500 - S90-7-30-005

Made from lightweight Neoprene material, Eliminates mud packing inside coils, Keeps spring adjuster and damper shaft clean for extended life, Easy Velcro split opening for shock & spring adjustment, Washable materialThis Part...

Eibach Pro-Spacer 30mm Spacer / Bolt Pattern 5x105 / Hub Center 56.5 for 11-15 Chevrolet Cruze - S90-4-30-045

Made from lightweight Neoprene material, Eliminates mud packing inside coils, Keeps spring adjuster and damper shaft clean for extended life, Easy Velcro split opening for shock & spring adjustment, Washable materialThis Part...

Eibach Pro-Spacer 30mm Spacer / Bolt Pattern 5x112 / Hub Center 57.1 for 09-14 VW Passat CC 3.6L - S90-7-30-012

Made from lightweight Neoprene material, Eliminates mud packing inside coils, Keeps spring adjuster and damper shaft clean for extended life, Easy Velcro split opening for shock & spring adjustment, Washable material

Eibach Pro-Spacer 30mm Spacer / Bolt Pattern 5x112 / Hub Center 66.5 for 09-15 Audi A4 (B8) - S90-7-30-007

Made from lightweight Neoprene material, Eliminates mud packing inside coils, Keeps spring adjuster and damper shaft clean for extended life, Easy Velcro split opening for shock & spring adjustment, Washable materialThis Part...

Eibach Pro-Spacer 30mm Spacer / Bolt Pattern 5x114.3 / Hub Center 60 for 06-15 Lexus IS350 - S90-4-30-016

Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of...