Comp Cams 4.6/5.4 XE262Ah-13 - 102500

These are the best cam set for a mild, mustang street build.  The peak power is similar to the 270s, but midrange power is a lot greater.  Expect a mildly choppy idle. Xtreme Energy™ 226/230 Hydraulic Roller Finger Follower Cams for Ford...

Comp Cams 4.6/5.4 XE266B - 106160

These are the most aggressive of the stock spring capable options. We recommend at least a 4.10 rear gear and a manual trans.  Xtreme RPM 230/230 Hydraulic Roller Finger Follower Cams for Ford 4.6/5.4/5.8L Modular 4 Valve Xtreme RPM 230/230...

Comp Cams 4.6/5.4 XE266B - 106360

These cams are good for a moderate to high power supercahrged or nitrous build.  Expect good power to 7500 with high boost. Can be used in n/a setups also if more peak power is desiredd without adding Requires valve springs. Xtreme Energy™-R...

Comp Cams 4.6/5.4 XE268H-14 - 102200

These cams are designed for NPI heads as their lower lift does not result in any valvetrain binding.  They can be used in PI heads, but the power will suffer due having only .500 lift. Xtreme Energy™ 230/236 Hydraulic Roller Finger Follower...

Comp Cams 4.6/5.4 XE270A - 106200

These cams are a good set for a moderately modded vehicle. They require at leaast 4.10 gears as low and midrange power will be reduced.  Also, they are stock spring capable.   Advertised Intake Duration 269 Advertised Exhaust...

Comp Cams 4.6/5.4 XE270AH-13 - 102600

The are a great cam set for those wanting an increase in upper RPM power without regard to low and midrange losses.  They require 3.73 to 4.10 gears for the best performance.  The idle will be choppy. Xtreme Energy™ 234/238 Hydraulic...

Comp Cams 4.6/5.4 XE270B - 106400

These require 3.73 or 4.10 gears and a 3600 stall if using an automatic trans. Power in a stock engine will be in the 360-370 range with significant tq losses down low.  The idle will be choppy. Xtreme XE-R 234/232 Hydraulic Roller Finger Follower...

Comp Cams 4.6/5.4 XE274B - 106460

These are for the most aggressive supercharged setups. The idle will be very choppy and drivability issues are to be expected. Xtreme XE-R S-Charged/N2O 238/240 Hydraulic Roller Finger Follower Cams for Ford 4.6/5.4/5.8 Modular. Max strip/street cams for...

Comp Cams 4.6/5.4 XE274H-14 - 102300

These are a moderately aggressive cam set for NPI heads due to their .500" lift limit.  We do no recommend these for PI heads.   Xtreme Energy™ 236/240 Hydraulic Roller Finger Follower Cams for Ford 4.6/5.4L Modular 2 Valve. Hot...

Comp Cams 4.6/5.4 XE278A - 106500

These are the most aggressive of the n/a camshaft offerings.  4.10 or steeper gears are required as well as a very high stall converter if an auto trans is used. Xtreme XE-R 242/240 Hydraulic Roller Finger Follower Cams for Ford 4.6/5.4/5.8L Modular...

Comp Cams 4.6/5.4 XE278Ah-13 - 102700

These are the most aggressive of the Comp 2v offerings.  4.30-4.56 gears are recommended and if used with an auto trans, a 4k stall or higher will be required.Xtreme Energy™ 242/246 Hydraulic Roller Finger Follower Cams for Ford 4.6/5.4L...

COMP Cams Dodge HEMI VVT 5.7/6.1/6.4 Custom Grind Cam SPECS REQUIRED - MUST BE DROP SHIPPED - 201-000-13

COMP Cams Dodge HEMI VVT 5.7/6.1/6.4 Custom Grind Cam SPECS REQUIRED - MUST BE DROP SHIPPED