Edelbrock Water By-Pass Kit - 8095

Edelbrock part #8095 Water Bypass Kit provides (2) bypass hoses, fittings and water neck adapter to plumb from the cylinder heads to the water neck. This is common on circle track 23 Deg high-port,...

Edelbrock 1 1/4 PCV Grommets 1Pr - 8094

One pair of valve cover PCV grommets. Fits standard 1-1/4" diameter valve cover holes. The i.d. is .75" to fit many common PCV valves. The rubber durometer was chosen to give a firm snug leak free...

Edelbrock 1/2-Inch Air Filter Spacer - 8093

High Performance Pro-Flo Air Cleaner Spacer 1/2"Warranty

Edelbrock 3/4-Inch Air Filter Spacer - 8092

Fits Between Carb Neck Flange And Air Filter AssemblyWarranty

Edelbrock Dual Quad Fuel Line Kit In Clr/Blk Finish - 80913

The Edelbrock ProClassic Fuel Hose Kit #80913 supplies fuel to two Edelbrock carbs when used on Edelbrock Dual-Quad manifolds. Use with a fuel hose kit such as our #8122 or #8127. 6-7/16"...

Edelbrock Adapter Inverted Flare - 8090

Edelbrock part #8090 Inverted Flare (3/8) Fuel Fitting for Edelbrock Square-Bore & AFB Carbs. The fitting comes with a sealing washer and has 5/8-20 threads. This fitting is standard on the E.P.S...

Edelbrock 3/8 Banjo Fuel Fitting - 8089

Edelbrock part #8059 Banjo Fitting is designed for Edelbrock Square-Bore & Carter AFB Carburetors.Warranty

Edelbrock Dual Quad Fuel Line Kit - 8088

The Edelbrock Fuel Hose Kit #8088 supplies fuel to two Edelbrock carbs when used on Edelbrock Dual-Quad manifolds. Use with a fuel hose kit such as our #8122 or #8127. 6-7/16" center-to-center,...

Edelbrock Eps Carb 6 An Fitting - 8087

Edelbrock part #8087 is a -6AN x 5/8"-20 Fuel Inlet Fitting for Edelbrock Square-Bore & Carter AFB Carbs. This fuel inlet fitting is designed to replace the EPS carburetor's existing fuel inlet...

Edelbrock Fitting 1/4-18 NPT X 3/8In Single Barb Brass - 8080

Edelbrock part #8080 Brass Hose Fitting is a 1/4-18" NPT fitting with a 3/8" barb. This Fitting will fit the rear vacuum port of all Edelbrock four-barrel carbs.Warranty

Edelbrock Coil Mounting Bracket for Chrysler Gen II Hemi / B-Rb 383-440 V8 Manifolds - 8079

Chrysler:Big-Block B-Series:383 (6.3L)/400 (6.6L);Chrysler:Big-Block RB-Series:413 (6.8L)/426 (7.0L)/440 (7.2L)Warranty

Edelbrock Fitting Brass Hose 1 00In Hose I D X 3/4-14 Pipe for Sb-Chrys Manifolds - 8078

Edelbrock part #8078 Brass Hose Fitting For S/B Chrysler Intakes is a single barb coolant hose fitting. The fitting has a 1" single barb nipple and 3/4-14 NPT threads on the opposite end. The fitting...