COMP Cams Alum Rocker Arms CHRy BB 1.6in - 1073-16

These 1.6 ratio rockers replace the rockers that come with our 1073 Shaft-Mount rocker system for Chrysler 383-440.CatalogUser 1

COMP Cams Alum Rocker Arm CHRy BB 1.6in - 1073-1

This 1.6 ratio rocker replaces the rockers that come with our 1073 Shaft-Mount rocker system for Chrysler 383-440.CatalogUser 1

COMP Cams Alum Rocker Set CHRy BB Speci - 1072-2

The 1072-2 shaft pair replaces the shafts that come with our Chrysler 383-440 aluminum shaft rocker system.CatalogUser 1

COMP Cams Alum Rocker Arm Chrysler BB Spec - 1072-1

The 1072-1 shaft replaces a shaft that comes with our Chrysler 383-440 aluminum shaft rocker system.CatalogUser 1

COMP Cams Alum Rocker Arm Kit Chrysler - 1071-KIT

Constructed from an aluminum alloy, this 1.5 ratio shaft-mount rocker system for Chrysler 383-440 has a tensile strength of 80,000, perfect for any race applications.CatalogUser 1

COMP Cams Camshaft Ne 259HR8 Dodge 2.0 - 107-400-8

For use with Neon RT or ported cylinder heads. More power throughout and substantial gains above 5300 RPM.CatalogUser 1This Part...

COMP Cams Camshaft Ne 256HR 8 Dodge 2.0 - 107-200-8

For use with stock Neon cylinder heads. More power throughout and substantial gains above 5000 RPM.CatalogUser 1This Part...

Comp Cams 4.6/5.4 XE278A - 106500

These are the most aggressive of the n/a camshaft offerings.  4.10 or steeper gears are required as well as a very high stall converter if an auto trans is used. Xtreme XE-R 242/240 Hydraulic...

Comp Cams 4.6/5.4 XE274B - 106460

These are for the most aggressive supercharged setups. The idle will be very choppy and drivability issues are to be expected. Xtreme XE-R S-Charged/N2O 238/240 Hydraulic Roller Finger Follower Cams...

Comp Cams 4.6/5.4 XE270B - 106400

These require 3.73 or 4.10 gears and a 3600 stall if using an automatic trans. Power in a stock engine will be in the 360-370 range with significant tq losses down low.  The idle will be choppy...

Comp Cams 4.6/5.4 XE266B - 106360

These cams are good for a moderate to high power supercahrged or nitrous build.  Expect good power to 7500 with high boost. Can be used in n/a setups also if more peak power is desiredd without...

Comp Cams 4.6/5.4 XE262A - 106300

This is a good cam set for mild setup where a relatively smooth idle and good vacuum is desired. Xtreme Xtreme Energy™-R 226/224 Hydraulic Roller Finger Follower Cams for Ford 4.6/5.4/5.8L...