Wilwood Bridge Bar Kit - GN6R 1.00 Thick Pad - 300-14219

Caliper Bridge Bar Kits contain bridge bar and hardware for replacement on GN6R calipers. Available in two pad widths types of GN6R: .80” and 1.00” thick. Engineered from high strength aluminum...

Wilwood Bridge Bar Kit - GN6R 0.80 Thick Pad - 300-14218

Caliper Bridge Bar Kits contain bridge bar and hardware for replacement on GN6R calipers. Available in two pad widths types of GN6R: .80” and 1.00” thick. Engineered from high strength aluminum...

Wilwood Spacer Pushrod Wilwood Tandem Master Cylinder - 300-13885

Push Rod Spacer for use in Wilwood’s Aluminum Tandem Master Cylinder. Used when a deep whole push rod retention is not required. Used with most power brake applications. With a 1.62” length, .468”...

Wilwood Adapter Rotor/Hat Register Ring 2.80in Dia. - 300-13741

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal...

Wilwood Adapter Rotor/Hat Register Ring 2.53in Dia. - 300-13696

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal...

Wilwood Adapter Rotor/Hat Register Ring 2.78in Dia. - 300-13651

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal...

Wilwood Adapter Rotor/Hat Register Ring 2.79in Dia. - 300-13506

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal...

Wilwood Rotor Adaptor Floating/Fixed - Sprint/Modified Hub 8 x 7.00 BC 3 x 5.00 BC - 300-13474

Rotor adapter for Sprint / Midget front hubs. Adapter is supplied with a standard 3 x 5.00” pattern for hub mounting and a dual 8 x 7.00” dynamic or fixed bolt pattern for rotor mounting. Made from...

Wilwood Adapter Rotor/Hat Register Ring 2.87in Dia. - 300-13328

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal...

Wilwood Adapter Rotor/Hat Register Ring 2.72in Dia. - 300-13053

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal...

Wilwood Adapter Rotor/Hat Register Ring 2.65in Dia. - 300-13012

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal...

Wilwood Caliper Piston Spring 37/.72 OD x 1.00 - 300-12995

Caliper Piston Knock Back Springs. Used in low brake pedal situations due to piston knock back caused by vibration, mount or spindle flex. Part # 300-12995 (.72” diameter) is used with all Wilwood...