Wilwood 8.80in Diameter Dynapro Lug Rotor and Snap Ring Dynamic Kit - Stainless Steel - 300-14913

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 12 lug (8.80” Snap Ring) Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic...

Wilwood Dynamic Lug Rotor Mounting and Snap Ring Kit - 300-14912

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 12 lug (7.77’ Snap Ring) Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic...

Wilwood Clip Kit Pad Pin Retainer D8 / DP6/ TX6R / AERO - 300-14504

Convenient set of four or part # 310-3634, CLIP,RETAINING,PIN for DP6, D8, TX6 and Aero calipers.

Wilwood Adapter Rotor/Hat Register Ring 2.28in Dia. - 300-12846

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal...

Wilwood Adapter Rotor/Hat Register Ring 2.44in Dia. - 300-12761

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal...

Wilwood Rotor Adaptor Floating - Sprint Hub 8x7.00 BC Gen II (3.37 x 2.28) - 300-12582

Rotor adapter for Wilwood’s GEN II Sprint / Midget inboard hubs. Adapter is supplied with a rectangular 3.37” x 2.28” pattern for hub mounting and a dual 8 x 7.00” dynamic or fixed bolt pattern for...

Wilwood Rotor Adaptor Floating - Sprint / Midget Hub 6x5.50 BC Gen II (3.37 x 2.28) - 300-12581

Rotor adapter for Wilwood’s GEN II Sprint / Midget inboard hubs. Adapter is supplied with a rectangular 3.37” x 2.28” pattern for hub mounting and a dual 6 x 5.50” dynamic or fixed bolt pattern for...

Wilwood Kit Snap Ring (1) and Wear Plates (8) Dynamic Drag Rotor - 300-12561

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 8 lug Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic Lug Mount system.

Wilwood Hub Shield 5mm (0.19in) Thick 5 x 4.50/4.75/5.00 - 300-11961

Wheel Spacer and Hub Protector. With a wheel bolt circle of 5 x 4.50”/4.75”/5.00” and a 5mm (0.197’) thickness. Engineered from high strength steel alloy and with a plated finish.

Wilwood Rebuild Kit Hardware & Seals DLS / BDLS/ DPS - 300-11789

Caliper Rebuild Kit for Dynapro Single and Dynalite Single Calipers with 1.75” pistons. Contains piston seals, wear plates, bleed screws, pad retainer and cotter pin to service both styles of...

Wilwood Bracket Spacer Kit .165 LG - Tubular - 300-11652

Wilwood’s Tubular Bracket Spacers are used for spacing & offset changes on many applications available multiple diameters and lengths. Engineered from high strength aluminum alloy and finished with...

Wilwood Cushion Clamp 3/8in .34 Mount Hole - 300-11637

Cable Clamp with neoprene cushion. Plated steel construction. And available in .312 and .375 diameter.