PAC Racing R394 retainers -- Godzilla

Made of Chrome Moly and have and are -.100" on the spring install height, these are designed to be used with the PAC Racing 1282LX, .650" max lift valve springs.  They can also be used with the .750" lift, 1282X springs to get more seat and max lift...

Single Godzilla Pushrod 8.29" for Hylift Johnson 2283 and 2283SE lifters

These are for use with Hylift Johnson, 2283 and 2283SE  lifters. Manton Series 3 pushrods: 3/8" x .095" wall thickness with a 8.290" overall length

Supertech / Apocalypse Godzilla .650" lift valve spring

Although priced lower than the PAC springs, these are in now way a lesser quality.  These have the same same specs as the PAC 1282LX and can also use the PAC R394 retainer.  They also accept the stock retainer if you choose to shim the spring...

Supertech / Apocalypse Godzilla high lift valve spring

These springs are made to the same specs as the PAC 1282.   These will accept both stock retainers and PAC R393 retainersspecs: Ovate Beehive Single Spring Rate – 400 C.B – 1.544  0.750 lift*160lbs @ 2.350 200lbs @ 2...

Supertech Godzilla .650" valve springs for stock retainers

These use the stock retainersOvate Beehive Single Spring Rate – 400 C.B – 1.544 – 0.650" lift 160 @ 2.250 420 @ 1.600  

Trend 3/8" pushrods, 8.325" length (Godzilla) with Johnson 2110R lifters (1 each)

These have a .080" wall thickness and are made of 4130 Chrome Moly.This is the optimum length for the Johnson 2110R lifter when installed in a stock engine or one with unmilled heads and a stock thickness head gasket.