Molnar H Beam Ford 7.3 PWR ADR Rods 6.319

Are you looking for the ultimate 7.3 Godzilla rods for your high output engine project? Molnar Technologies H Beam Ford 7.3 Godzilla rods are machined from billet 4340 steel, and then heat treated to provide improved strength. To make the rods even...

Pac Racing 1282LX valve springs -- Godzilla

These are a good choice for a daily driver with stock or aftermarket lifter.  They will take up to .650" lift and the most aggresive lobes designed for a hyd lifter.1282LX specs: Ovate Beehive Single Spring Rate – 400 C.B – 1...

Pac Racing 1282X valve springs -- Godzilla

These springs are more racing oriented and have a max lift of .  They are not a good choice for a daily driver with stock lifters.  For a street driven car/truck a better choice are they 1282LX springs with the R-394 retainers.1282X...

PAC Racing R393 retainer -- Godzilla

These are standard height retainers designed to be used with the PAC Racing 1282X valve springs for the Ford 7.3 Godzilla and are made of Chrome Moly.  

PAC Racing R394 retainers -- Godzilla

Made of Chrome Moly and have and are -.100" on the spring install height, these are designed to be used with the PAC Racing 1282LX, .650" max lift valve springs.  They can also be used with the .750" lift, 1282X springs to get more seat and max lift...

Point 1 (P1) Godzilla Main Studs K063-M01S

FORD GODZILLA 7.3L MAIN STUD KIT, W/ SIDE BOLTS, 12PT NUTS, S220 SERIES, BLACK OXIDE FINISH. The S220 kits are 220,000 psi UTS which is a 6304 material (similar to ARP 2000)

Point 1, Ford Godzilla 7.3L Head stud kit E190 series K063-H01E

Ford Godzilla 7.3L HHead studs, E190 Series, black oxide finish (compareable to ARP 8740s)Includes 20 studs, 20 washers and 20, 12pt nuts.

Point 1, S220 head studs Godzilla

The S220 series (ARP 2000 equivilent) from Point 1 are a required upgrade for those engines seeing high boost/nitrous use to prevent heads from lifting and/or blown head gasksets.  These are the best head studs offered by P1. Kit includes: 20 ea 12...

Stainless Steel Godzilla Exhaust valves 1.710" dia (set of 8)

SI Godzilla Exhaust valves Diameter: 1.710" Stem Dia: 8mm Length: stock Keeper type: multi grove hardened tip    

Stainless Works 20-21 Ford F-250/F-350 7.3L 304SS Legend Catback w/ 4in Matte Black Tips - FT220CBL-B

Stainless Works 20-21 Ford F-250/F-350 7.3L 304SS Legend Catback w/ 4in Matte Black Tips

Stainless Works 20-21 Ford F-250/F-350 7.3L 304SS Legend Catback w/ 4in Polished Tips - FT220CBL

Stainless Works 20-21 Ford F-250/F-350 7.3L 304SS Legend Catback w/ 4in Polished Tips

Stainless Works 20-21 Ford F-250/F-350 7.3L 304SS Redline Catback w/ 4in Matte Black Tips - FT220CBR-B

Stainless Works 20-21 Ford F-250/F-350 7.3L 304SS Redline Catback w/ 4in Matte Black Tips