COMP Cams Bolt 14MMx1.25 Piston Stop - 4795CPG

Positively stop piston in order to find Top Dead Center (TDC) Bolt style screws into spark plug hole while plate type bolts across any cylinder bore when heads are off.CatalogUser 1

COMP Cams Pointer Degree Wheel - 4794CPG

This pointer is designed for use with a camshaft degree wheel. As the degree wheel turns, this pointer stays in place and indicates the position of the engine cycle.CatalogUser 1

COMP Cams Socket For CS Crank - 4793CPG

The COMP crankshaft socket for Chevrolet Small Block, 90 degree V6, GM 4 cyl and Ford 4.6 is the last crankshaft socket that you'll need. Featuring a 1/2" drive socket and a knurled nut, our socket...

COMP Cams Degree Wheel - 4790CPG

Multiple sized degree wheels provide precision and accuracy Size allows for use on engine stand or with the engine still in vehicle Can be bolted on most harmonic balancers or used with a COMP...

COMP Cams Degree Wheel Comp 7.5in - 4787CPG

Multiple sized degree wheels provide precision and accuracy Size allows for use on engine stand or with the engine still in vehicle Can be bolted on most harmonic balancers or used with a COMP...

COMP Cams Degree Cam Bushing Set - 4760CPG

Color coded for easy identification. Accurately position cams. Precision manufactured. Requires a 13/32" drill set. Fit small and Big Block Chevrolet, Big Block and 426 HEMI Chrysler.CatalogUser 1

COMP Cams Spring Shim Kit 1.500 - 4757CPG

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.500" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs. Made from the...

COMP Cams Spring Shim Kit 1.640 - 4756CPG

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.640" outside diameter and .635"-.650" inside diameter are used to equalize the installed height of valve springs. Made...

COMP Cams Spring Shim Kit 1.480 - 4755CPG

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.480" outside diameter and .765" inside diameter are used to equalize the installed height of valve springs. Made from the...

COMP Cams Spring Shim Kit 1.437 - 4754CPG

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs. Made from the...

COMP Cams Spring Shim Kit 1.250 - 4753CPG

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve springs. Made from the...

COMP Cams 5/16 Arbor (For Cutters) - 4730CPG

This Arbor/Pilot is required for use with COMP Spring Seat Cutters and Valve Guide Cutters. They will work with the valve guide cutters used for shortening the guide for a high lift Cam or installing...