COMP Cams Camshaft C43 260H-R10 - 09-410-8

Stock Gear Ratios and Converter - For Carbureted Applications Balance shaft equipped 4.3L engines were introduced in '92 but GM continued to produce the previous version until '94. Non-balance shaft...

COMP Cams Hardware Kit C43 W/O Balance Shaft - 09-1001

COMP Cams has put together these time saving kits containing all of the necessary pieces to help you smoothly install hydraulic Roller lifters in your V6 or V8 block originally equipped with a...

COMP Cams Hardware Kit C43 W/ Balance Shaft - 09-1000

COMP Cams has put together these time saving kits containing all of the necessary pieces to help you smoothly install hydraulic Roller lifters in your V6 or V8 block originally equipped with a...

COMP Cams Camshaft CS 311Qs10 .900 Base - 08-610-44

Recommended in highly modified 420+ c.i. stroker applications with higher compression. 3500+ Stall.CatalogUser 1

COMP Cams Camshaft CS 305Qio8 - 08-609-44

Fits '87+ GEN 1 Chevrolet 305-350 Small Blocks w/ Factory Roller Camshafts (Not LT-1/LS1 etc)CatalogUser 1

COMP Cams Camshaft CS 299Qs10 .900 Base - 08-608-44

Hydraulic Roller - 4-Pattern .900" Base Circle: Great in larger c.i. street to street/strip stroker small blocks with good heads.; Outboard Specs: 301/313 Advertised Duration, 248/258 Duration ...

COMP Cams Camshaft CS 293Qio8 - 08-607-44

Excellent for street/strip applications with good heads and raised compression in high RPM engines. 3200+ stall.CatalogUser 1

COMP Cams Camshaft CS 287Qs9 .900 Base - 08-606-44

Best choice for street 383 stroker engines with good cylinder heads. Very wide power range. 2600+ stall.CatalogUser 1

COMP Cams Camshaft CS 281Qio8 - 08-605-44

Great all around choice for street applications in modified engines and 2500+ stall or manual transmissionsCatalogUser 1

COMP Cams Camshaft CS 269Qio8 - 08-604-44

Best choice for smaller c.i. applications with very good heads. Extremely wide power range. 1800+ stall.CatalogUser 1

COMP Cams Camshaft CS 299T HR-107 BMT T - 08-602-8

Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.CatalogUser 1

COMP Cams Camshaft CS 291T HR-107 MT Th - 08-601-8

Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for...