COMP Cams Socket For CS Crank - 4793CPG

The COMP crankshaft socket for Chevrolet Small Block, 90 degree V6, GM 4 cyl and Ford 4.6 is the last crankshaft socket that you'll need. Featuring a 1/2" drive socket and a knurled nut, our socket...

COMP Cams Ti Retainers Stock Height 7De - 791-16

Precision machined from 6AL4V titanium, these retainers feature better material consistency and bullet proof durability. These 7 degree retainers fit Ford 4.6L 2 Valve engines with our 26123 Beehive...

COMP Cams Steel Retainers 7Deg 26113 St - 792-16

Precision machined from chromemoly steel then black oxided, these 7 degree retainers are designed specifically for 26113 Beehive springs on Ford 4.6 2 Valve applications.CatalogUser 1This Part...

COMP Cams Valve Spring H/L Ford 2V Beeh - 26125-16

Race Street 1.101" OD Beehive Springs; 1.640" Installed Height; 16 SpringsCatalogUser 1

COMP Cams Valve Springs Ford 4.6L 2 Valve - 26113-16

Performance Street 1.061" OD Beehive Spring; 1.570" Installed Height; 16 SpringsCatalogUser 1This Part Fits:YearMakeModelSubmodel1997-2000FordE-150 EconolineBase1997-2000FordE-150...

Comp Cams 4.6/5.4 XE278Ah-13 - 102700

These are the most aggressive of the Comp 2v offerings.  4.30-4.56 gears are recommended and if used with an auto trans, a 4k stall or higher will be required.Xtreme Energy™ 242/246...

Comp Cams 4.6/5.4 XE270AH-13 - 102600

The are a great cam set for those wanting an increase in upper RPM power without regard to low and midrange losses.  They require 3.73 to 4.10 gears for the best performance.  The idle will...

Comp Cams 4.6/5.4 XE262Bh-16 - 102560

Except for their wider LSA, these are the same as the 102500s.  These would be great for a mild supercharger setup where a smooth idle is desired. Xtreme Energy™ Blower 226/230 Hydraulic...

Comp Cams 4.6/5.4 Tpx 262HR - 102535

Optimized combination for power and torque with acceptable fuel economy for daily driver or highway cruiser. Requires tuning.   Can use stock springs. Advertised Intake...

Comp Cams 4.6/5.4 Tpx 248HR - 102525

These cams are great for a very mild, auto trans build with a stock tq converter.   Good MPG can be expected, but with a loss of peak power.  Tq will be maintained and as such, these...

Comp Cams 4.6/5.4 XE262Ah-13 - 102500

These are the best cam set for a mild, mustang street build.  The peak power is similar to the 270s, but midrange power is a lot greater.  Expect a mildly choppy idle. Xtreme Energy™...

Comp Cams 4.6/5.4 XE274H-14 - 102300

These are a moderately aggressive cam set for NPI heads due to their .500" lift limit.  We do no recommend these for PI heads.   Xtreme Energy™ 236/240 Hydraulic Roller Finger...