COMP Cams Steel Retainers Ford 4.6L 4V - 799-32

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams Steel Retainers are the perfect solution to this problem. COMP engineers used 3D CAD with FEA to design retainers with a modern and...

COMP Cams Titanium Retainers 4.6L 4V Fo - 798-32

no longer will you be preoccupied with splitting a retainer and tearing up an engine when turning 10,000 RPM. These COMP Cams titanium retainers are made from the finest 6AL4V alloy for maximum stiffness and minimal warpage. The 6AL4V alloy is...

COMP Cams Valve Springs Ford 4.6/5.4L - 26123-32

With a .500" maximum lift, these Beehive Valve Springs were designed for Ford 4.6L Modular 4 Valve engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure...

GT500 & Cobra Jet Intake Valve Springs (16)

PAC-1230X springs for GT500 & Cobra Jet intake valves   OD Large End 1.083 ID Large End 0.720 ID Small End 0.636 Install Height 1.715 Load at Installed Height 120 Spring Open Height 1.165 Spring Open...

Supertech/Apocalypse 4.6/5.4 4V valve seals (32ea)

Ford Modular 4.6L/5.4L - 7mm Viton valve stem seals, 32ea.  These fit all 4.6 4v cylinder heads.

Supertech/Apocalypse 2V valve springs for stock retainers (drop-in)

For Ford Modular 4.6L and 5.4L engines with PI 2v heads.  These have been used with 20psi without any issues.  We recommend these for most applications not seeing over 30psi.  These are comparable to the PAC 1214x valve springs. Beehive...

Supertech/Apocalypse 3 groove, 7 deg valve locks for 7mm valves (1 pair of locks)

These are 3 groove, 7 degree locks for the 7mm valves used in all 4.6 and 5.4 2V engines.  The qty is one pair of locks (for one valves).  Order by the number of valves you have that require locks.

Supertech/Apocalypse 4v springs and retainers

This kit includes 32 springs and steel retainers.  These will work for most n/a and boosted setups.These are the next step up from the Supertech Apocalype drop-in springs.  Beehive Single spring OD top 1.102"OD bottom .957"seat pressure...

Supertech/Apocalypse 4v springs for stock retainers (drop-in) single spring

These springs are good for use in most street cars and many race cars.  Good for 30psi, these are an affordable option.Ford Modular 4.6L 4v Beehive Single spring OD 1.075"/.957" 96lbs@1.417" Rate 348lbs/in CB: .866" Designed for use with stock...

Supertech/Apocalypse 4v springs for stock retainers - (32 springs)

This is a set of 32 springs that are good for use in most street cars and many race cars.  They are good for 30psi and are a very affordable option for most boosted and n/a 4v engines.Ford Modular 4.6L 4v Beehive Single spring OD 1.075"/...