COMP Cams 3-Bolt 4.8L/5.3L/5.7L/6.0L/6.2L GM LS Camshaft Install Kit - 5621CPG

See 5622 for LS7 Cam Change Kit, See 5623 for Single-Bolt VVT Cam Change Kit (1 Cam Bolt, No lock plate), Direct replacement for all factory 3-Bolt GM LS Engines. Converts single-bolt LS engines to 3-bolts configuration, which is great for VVT/AFM Delete...

COMP Cams 3/8 Arbor (For Cutters) - 4734

This Arbor/Pilot is required for use with COMP Spring Seat Cutters and Valve Guide Cutters. They will work with the valve guide cutters used for shortening the guide for a high lift Cam or installing a COMP Cams PTFE Seal for oil control.CatalogUser 1

COMP Cams 5/16 Arbor (For Cutters) - 4730CPG

This Arbor/Pilot is required for use with COMP Spring Seat Cutters and Valve Guide Cutters. They will work with the valve guide cutters used for shortening the guide for a high lift Cam or installing a COMP Cams PTFE Seal for oil control.CatalogUser 1

COMP Cams 5in Extension - 4912CPG

These COMP Cams dial indicator tip extensions will allow you to use your dial indicator for many other applications. They are available in different lengths to suit your specific needs.CatalogUser 1

COMP Cams 66-71 Chrysler 426 Hemi 8Cyl Drag Race 296/304 Solid Roller Camshaft - 24-723-11

Drag Race 296/304 Solid Roller Cam (45 Degree Bank Angle) for Chrysler 426 HEMICatalogUser 1

COMP Cams 67-96 Chevrolet Big Block 396-454 Blower and Turbo Camshaft CB 280AH-14 - 11-404-5

Blower and Turbo 232/237 Hydraulic Flat Tappet Cam for Chevy Big Block 396-454 is a strong blower cam. It works well with small blowers, centrifugal or roots.User 1Catalog

COMP Cams 7 Deg. Tool Steel Retainer Set of 16 For 7228/7230 Conical Springs - 1774-16

Tool Steel Retainer Set of 16 for 7228 and 7230 Conical Springs: 8mm Valve Stem, 1.290" ODUser 1

COMP Cams 7.3L Godzilla Stage 1 NSR/NTR Hydraulic Roller Camshaft - 405-201-17

The Godzilla Stage  1 NSR/NTR cam utilizes the full phaser sweep for excellent mileage and optimized performance, without compromising durability. It requires no adjustment to the factory cam phasing or ignition timing without the need for a limiter...

COMP Cams 7.3L Godzilla Stage 2 NSR Hydraulic Roller Camshaft - 405-203-17

The Godzilla Stage 2 NSR cam was developed to offer maximum torque in the low- to mid-range for heavy vehicles and towing. It offers an increase of over 75 lb-ft of torque at 3000 RPM! It requires a phaser limiter (# 5473). Testing with the 5473 phaser...

COMP Cams 88+ Chevrolet Small Block Ultra ARC Narrow Aluminum Series Rocker Arm - Set of 16 - 19017-16

The Comp Cams Ultra ARC Aluminum Series Rocker Arms increase engine power, improve valvetrain stability, and enhance oiling efficiency. Their extruded design—developed using FEA analysis—creates a stronger, stiffer rocker body without adding unnecessary...

COMP Cams 88-06 Jeep 4.0L .450in Lift Valve Springs Kit - 983J-KIT

The Ovate Wire Valve Spring Kit for Jeep 4.0L 1988-06 Applications supports the installation of up to .450" lift high performance cams. Featuring properly engineered valve springs that handle harmful dynamic valve train stress more efficiently, this kit...

COMP Cams 97-15 GM LS GEN III/IV 3-Bolt 8 Cyl. Drift 237/249 Hydraulic Roller Camshaft - 54-779-11

The Drift Cam+ for GM 6.0L/6.2L LS is a camshaft upgrade designed to wake up LS applications and provide a wide, usable power increase for the grassroots enthusiast. Increased durations and lift for larger displacements over the original NSR Drift cam...