COMP Cams Pushrods CRS 09+ Hemi 5/16in Int 8.125in & Exh 6.800in *Not Compatible w/ Stock Camshaft* - 8721-16

COMP Cams HEMI pushrod sets are a continuation of the Hi-Tech Pushrod line. These pushrods sets are engineered to provide optimal preload for specific late-model HEMI applications when using performance camshafts. Like all COMP Cams Hi-Tech Pushrods,...

COMP Cams Pushrods CRS Hemi 5/16 In&Ex - 7914-16

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the...

COMP Cams Rocker Arm KitLS3 1.8 5/16 - 16765-KIT

Increase Strength Over Stock, While Increasing Lift without Swapping Cams. For LS3/L99/L76 and Other Rectangle-Port Head Equipped LS Applications. Includes Full Set of (16) Stud-Mount Rockers (with Poly Locks), 3/8" Studs and Raised Guide Plates for...

COMP Cams Rocker Arm Ultra Gold Arc SBC - 19002-1

The Comp Cams Ultra ARC Aluminum Series Rocker Arms increase engine power, improve valvetrain stability, and enhance oiling efficiency. Their extruded design—developed using FEA analysis—creates a stronger, stiffer rocker body without adding unnecessary...

COMP Cams Rocker Arm/Pushrod Kit Magnum - RP1414-12

Our rocker arm and pushrod kit for Chevrolet 173 V6 includes a set of our 1.6 ratio Magnum rockers and 6.165" long High Energy pushrods.CatalogUser 1This Part...

COMP Cams Roller Lifter .904in Dia Center - 892C-1

.300" Tall Roller lifter, centered Pushrod seat, cutaway body with oil band, single lifterCatalogUser 1

COMP Cams Rotator Eliminators CB Exh. - 4779-8

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines. COMP Cams offers a simple but effective solution to this problem. These Valve Spring Locators provide a thin, hardened Steel alloy seat that...

COMP Cams Solid Lifters SB & BB Chevy V - 2900-12

These Performance Series solid lifters feature a precision-ground crown radius and surface finish, perfect for high-end street and race engines with higher spring pressures. For 6 cylinder applications with .842" lifter bores.CatalogUser 1

COMP Cams Spring Shims .030 X 1.437 - 4743-16

These .030" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs. Made from the highest quality shim stock, these shims are heat treated to stand up to radical Cam...

COMP Cams Stage 1 HRT Camshaft 2009+ Dodge 6.4L Hemi w/ VVT - 201-302-17

The Gen III Hemi market is rapidly expanding, and the HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque camshafts available for these engines. The “Low Shock...

COMP Cams Stage 1 NSR Camshaft 03-08 Chrysler / Dodge / Jeep 5.7L Hemi Engines - 112-300-11

The Gen III Hemi market is rapidly expanding, and the HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque camshafts available for these engines. The “Low Shock...

COMP Cams Stage 2 Camshaft 03-08 Chrysler / Dodge / Jeep 5.7L Hemi Engines - 112-303-11

The Gen III Hemi market is rapidly expanding, and the HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and torque camshafts available for these engines. The “Low Shock...