COMP Cams Camshaft Set F4.6/5.4D XE266B - 106360

Serious street effort for supercharged or nitrous applications. Requires custom tuning and lower gears. Automatics will require a 2000+ stall. Mild rough idle.CatalogUser 1This Part...

COMP Cams Camshaft Set F4.6S XE274H-14 - 102300

Hot street, 3.55-3.73 gears, 2000+ stall. Requires custom tuning. Rough idle.CatalogUser 1

COMP Cams Dual Spring w/ Damper 1.560 OD 1.950 IH .760 Lift Set - 26953-16

they redefine reliability and consistency in the performance automotive aftermarket. The 26953 is geared towards race-oriented solid flat tappet and aggressive roller applications

COMP Cams Dual Spring Set 1.550 OD 1.900 IN .740 Lift - 26943-16

26953 fits applications near a 1.900" installed height and a spring pocket of 1.560". It has a 550 lbs/in rate and over 600 lbs open load for increased RPM and improved dynamics.

COMP Cams Single Spring Valve Set 1.404 OD 1.650 IH .550 Lift - 26903-12

they redefine reliability and consistency in the performance automotive aftermarket. The 26903 valve springs are an excellent choice for many flat tappet cams in applications with limited installed...

COMP Cams Valve Springs 1.440in OD - 26942-12

COMP Cams Valve Springs 1.440in OD

COMP Cams Camshaft Kit FE XR270HR-10 - K33-422-11

Great mid-range torque in performance street application

COMP Cams Ford 7.3L Godzilla Cam Phaser Lockout - 5474

The COMP Cams® Cam Phaser Lockout Kit eliminates variable valve timing (VVT) to make the installation of larger cams possible for horsepower increases. The phaser lockout prevents VVT from moving the...

COMP Cams Spring Locator 1.285in x .532in x .135in (Set of 16) - 4684-16

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4684 seat's 1.285" OD works well with our alve springs in ." guide...

COMP Cams Stage 1 Thumpr 218/229 Hydraulic Roller Cam Kit for Gen III LS 4.8/5.3/6.0L Trucks - CK54-700-11

Workhorse: FasTrack FT1801 04 - 05 6 L Engine, Workhorse: FasTrack FT1461 04 - 05 6 L Engine, Chevrolet: SSR 05 - 06 6 L Engine, GMC: Sierra 3500 Classic 07 - 07 6 L Engine, Chevrolet: Avalanche 07 -...

Comp Cams 03-10 Ford 6.0L/6.4L Powerstroke Hydraulic Roller Stage 2 Camshaft - 435-302-13

Stage 2 High Lift LST™ Hydraulic Roller Cam for Ford 6.0L/6.4L Power Stroke is the perfect cam for most performance engine buildsProduct Brochure - a specific brochure describing a ProductCatalog

COMP Cams Camshaft Kit CS 246PEH - K12-305-3

Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added...