COMP Cams Tool LS Valve Spring Compressor - 5462CPG

This innovative yet simple tool makes removing valve springs on LS engines easy. Complete with high quality hardware, this tool is able to remove two springs at once.CatalogUser 1

COMP Cams Tool Pushrod Seat Insert Removal - 5350CPG

COMP Cams Tool Pushrod Seat Insert RemovalUser 1

COMP Cams Tool Set Lifter Bore To Lobe - 5022CPG

The camshaft lobe center marking tool set is designed to ensure that your lifters are riding in the middle of the camshaft lobe. This set comes with .842", .875" and .904" diameter tools for use in a...

COMP Cams Grooving Tool .842 Diameter - 5003CPG

The COMP lifter bore grooving tool cuts a groove into the lifter bore which ensures pressurized oil is fed between the lifter and camshaft. Developed by NASCAR engine builders, this tool reduces...

COMP Cams Chrysler Hemi 5.7L/6.1L/6.4L Crank Socket - 4945CPG

COMP Cams Chrysler Hemi 5.7L/6.1L/6.4L Crank Socket

COMP Cams Beehive Spring Micrometer 1.6 - 4930CPG

Accurate to .001", our 1.600"-2.200" range beehive spring mic, is the most precise way to measure installed height. Essential for ensuring seat and open pressures or calculating coil bind, this mic...

COMP Cams Spring Micrometer 1.600-2.200 - 4929CPG

Accurate to .001", our 1.600"-2.200" range spring micrometer, is the most precise way to measure installed height. Essential for ensuring seat and open pressures or calculating coil bind, this mic is...

COMP Cams Spring Micrometer 1.400-1.800 - 4928CPG

Accurate to .001", our 1.400"-1.800" range spring micrometer, is the most precise way to measure installed height. Essential for ensuring seat and open pressures or calculating coil bind, this mic is...

COMP Cams Cam Checking Tool For Chrysler - 4926CPG

The COMP camhaft checking tool is designed to slide into the lifter bore and ride on the cam lobe. A dial indicator is then attached to the checking tool so that lobe lift and base circle runout can...

COMP Cams Cam Checking Tool - 4925CPG

The COMP camhaft checking tool is designed to slide into the lifter bore and ride on the cam lobe. A dial indicator is then attached to the checking tool so that lobe lift and base circle runout can...

COMP Cams Tool Dampner Installation - 4920CPG

Our Harmonic Balancer kit includes 7/16", 1/2", 9/16", 5/8", 3/4", 12mm, 14mm and 16mm adapters to handle all domestic and foreign engine applications. Features a thrust bearing for gentle balancer...

COMP Cams Fixture Crh Cam Degree - 4915CPG

This COMP fixture is essential for any engine project where valvetrain measurements are required. Our tool is designed for applications with a 1/2" head stud, and holds a dial indicator for...