COMP Cams Socket For CS Crank - 4793CPG

The COMP crankshaft socket for Chevrolet Small Block, 90 degree V6, GM 4 cyl and Ford 4.6 is the last crankshaft socket that you'll need. Featuring a 1/2" drive socket and a knurled nut, our socket...

COMP Cams Titanium Retainers 4.6L 4V Fo - 798-32

Precision machined from 6AL4V titanium, these retainers feature better material consistency and bullet proof durability. These 7 degree retainers fit Ford 4.6L 4 Valve engines with our 26123 Beehive...

COMP Cams 92-11 Ford Modular 4.6L DOHC Performance Lash Adjusters - Set of 32 - 84031-32

Lash adjusters in Ford Modular engines can leak down under high RPM, causing lost duration and lift, as well as increased valve train wear. The COMP Cams Ford Modular Performance Lash Adjusters are...

COMP Cams Steel Retainers Ford 4.6L 4V - 799-32

Precision machined from chromemoly steel then black oxided, these 7 degree retainers are designed specifically for 26123 Beehive springs on Ford 4.6 4 Valve applications.CatalogUser 1This Part...

COMP Cams Valve Springs Ford 4.6/5.4L - 26123-32

Performance Street 1.105" OD Beehive Spring; 1.470" Installed Height; 32 SpringCatalogUser 1This Part Fits:YearMakeModelSubmodel1996-2001,2003-2004FordMustangGT2001FordMustangGT...

Comp Cams 4.6/5.4 XE278A - 106500

These are the most aggressive of the n/a camshaft offerings.  4.10 or steeper gears are required as well as a very high stall converter if an auto trans is used. Xtreme XE-R 242/240 Hydraulic...

Comp Cams 4.6/5.4 XE274B - 106460

These are for the most aggressive supercharged setups. The idle will be very choppy and drivability issues are to be expected. Xtreme XE-R S-Charged/N2O 238/240 Hydraulic Roller Finger Follower Cams...

Comp Cams 4.6/5.4 XE270B - 106400

These require 3.73 or 4.10 gears and a 3600 stall if using an automatic trans. Power in a stock engine will be in the 360-370 range with significant tq losses down low.  The idle will be choppy...

Comp Cams 4.6/5.4 XE266B - 106360

These cams are good for a moderate to high power supercahrged or nitrous build.  Expect good power to 7500 with high boost. Can be used in n/a setups also if more peak power is desiredd without...

Comp Cams 4.6/5.4 XE262A - 106300

This is a good cam set for mild setup where a relatively smooth idle and good vacuum is desired. Xtreme Xtreme Energy™-R 226/224 Hydraulic Roller Finger Follower Cams for Ford 4.6/5.4/5.8L...

Comp Cams 4.6/5.4 XE270A - 106200

These cams are a good set for a moderately modded vehicle. They require at leaast 4.10 gears as low and midrange power will be reduced.  Also, they are stock spring capable.   Advertised...

Comp Cams 4.6/5.4 XE266B - 106160

These are the most aggressive of the stock spring capable options. We recommend at least a 4.10 rear gear and a manual trans.  Xtreme RPM 230/230 Hydraulic Roller Finger Follower Cams for Ford 4...