COMP Cams Cam Checking Tool For Chrysler - 4926CPG

This innovative tool slides into the lifter bore and rides on the Camshaft to measure lobe lift and base circle runout. The tool includes two followers: one for Solid and hydraulic flat tappet cams and one for Roller cams. Built-in o-ring Oldsmobile tool...

COMP Cams Cam Fixture Valve W/Metric A - 4902CPG

COMP Cams offers two styles of Cam checking fixtures--heads on and heads off--to suit your automotive needs. The cylinder heads' off-engine fixtures were designed to maintain proper geometry, while holding a dial indicator (not included) and a 5 in...

COMP Cams Chrysler Hemi 5.7L/6.1L/6.4L Crank Socket - 4945CPG

COMP Cams Chrysler Hemi 5.7L/6.1L/6.4L Crank Socket

COMP Cams Cleaning BRush For Pushrod - 7700CPG

COMP Cams is pleased to introduce our New Pushrod Cleaning Brush. This new brush is perfect for cleaning the inside of pushrods that oil through the center. This brush is the answer for thoroughly cleaning push rods. The brush is 12 inches long and...

COMP Cams Crank Gear Install Tool - 4789CPG

This crankshaft gear installation tool is designed for use with our 4920 harmonic balancer installation kit for professionally installing a timing gear on crankshafts.CatalogUser 1

COMP Cams Crank Socket FS/FF/P - 4798CPG

Specially designed 1/2" drive socket allows rotation of engine assembly. Knurled retaining nut Oldsmobile degree wheel in place. Can be loosened while on crank snout so that the wheel can be turned independent of the engine when finding TDC.CatalogUser 1

COMP Cams Crank Socket Hemi 5.7 6.1 6 - 4944-CS

The COMP crankshaft socket for Chrysler HEMI 5.7/6.1L is the last crankshaft socket that you'll need. Featuring a 1/2" drive socket and a knurled nut, our socket is designed for use with a degree wheel.CatalogUser 1

COMP Cams Cutter For Stud Boss - 4729

When using screw-in Studs on a factory cylinder head it is necessary to machine down the Stud boss equal to the thickness of the new Stud's jam nut plus the guide plate thickness. The Stud Boss Cutter from COMP Cams comes with a universal arbor that also...

COMP Cams Dual Feeler Gauge Handle - 5602CPG

The dual feeler gauge handle makes checking intake and exhaust valve lash much easier by allowing you to keep two hold two different feeler gauges at the same time.CatalogUser 1

COMP Cams Fixture Crh Cam Degree - 4915CPG

This COMP fixture is essential for any engine project where valvetrain measurements are required. Our tool is designed for Applications with a 1/2" head Stud, and Oldsmobile a dial indicator for measuring lifter travel.CatalogUser 1

COMP Cams Flange For Mini Spring Tester - 5315

Hydraulic mini tester is designed to be portable and low cost alternative to bench top style spring testing 0-1000 lb. tester scaled in 20 lb. increments Includes rubber gauge protector and recalibration feature Hex-design body can be placed in a vise,...

COMP Cams Flask 100Cc X 1Cc Graduated - 4994

This 100cc x 1cc graduated flask replaces the flask that comes with our 4975 100cc economy head cc kit.CatalogUser 1