COMP Cams 6in Dial Calipers - 4908CPG

Dial calipers are a must-have for any hotrodder. These analog dial calipers measure up to 6" in .001" increments and feature smooth thumb rollers, a protective case and a rigid stainless steel body.CatalogUser 1

COMP Cams 6in Extension - 4911CPG

This 6" tip extension for dial indicators allows you to use your dial indicator in tight spaces that require a longer reach.CatalogUser 1

COMP Cams Beehive Spring Micrometer 1.6 - 4930CPG

Accurate to .001", our 1.600"-2.200" range beehive spring mic, is the most precise way to measure installed height. Essential for ensuring seat and open pressures or calculating coil bind, this mic is a must-have for any valvetrain project.CatalogUser 1

COMP Cams CaliBRation Spring For Spring - 5316

The use of this test spring is highly recommended as the unit can be tested and recalibrated in the field.CatalogUser 1

COMP Cams Cam Checking Tool - 4925CPG

This innovative tool slides into the lifter bore and rides on the Camshaft to measure lobe lift and base circle runout. The tool includes two followers: one for Solid and hydraulic flat tappet cams and one for Roller cams. Built-in o-ring holds tool...

COMP Cams Cam Checking Tool For Chrysler - 4926CPG

This innovative tool slides into the lifter bore and rides on the Camshaft to measure lobe lift and base circle runout. The tool includes two followers: one for Solid and hydraulic flat tappet cams and one for Roller cams. Built-in o-ring Oldsmobile tool...

COMP Cams Cam Fixture Valve W/Metric A - 4902CPG

COMP Cams offers two styles of Cam checking fixtures--heads on and heads off--to suit your automotive needs. The cylinder heads' off-engine fixtures were designed to maintain proper geometry, while holding a dial indicator (not included) and a 5 in...

COMP Cams Chrysler Hemi 5.7L/6.1L/6.4L Crank Socket - 4945CPG

COMP Cams Chrysler Hemi 5.7L/6.1L/6.4L Crank Socket

COMP Cams Cleaning BRush For Pushrod - 7700CPG

COMP Cams is pleased to introduce our New Pushrod Cleaning Brush. This new brush is perfect for cleaning the inside of pushrods that oil through the center. This brush is the answer for thoroughly cleaning push rods. The brush is 12 inches long and...

COMP Cams Crank Gear Install Tool - 4789CPG

This crankshaft gear installation tool is designed for use with our 4920 harmonic balancer installation kit for professionally installing a timing gear on crankshafts.CatalogUser 1

COMP Cams Crank Socket FS/FF/P - 4798CPG

Specially designed 1/2" drive socket allows rotation of engine assembly. Knurled retaining nut Oldsmobile degree wheel in place. Can be loosened while on crank snout so that the wheel can be turned independent of the engine when finding TDC.CatalogUser 1

COMP Cams Crank Socket Hemi 5.7 6.1 6 - 4944-CS

The COMP crankshaft socket for Chrysler HEMI 5.7/6.1L is the last crankshaft socket that you'll need. Featuring a 1/2" drive socket and a knurled nut, our socket is designed for use with a degree wheel.CatalogUser 1