COMP Cams 1.740 Spring Seat Cutter For . - 4724CPG

This valve seat cutter allows you to enlarge the cylinder head spring pocket to 1.740" outer diameter while reducing the outer diameter of the valve guide to .630".CatalogUser 1

COMP Cams 1.810 Spring Seat Cutter For - 4723CPG

This valve seat cutter allows you to enlarge the cylinder head spring pocket to 1.810" outer diameter while reducing the outer diameter of the valve guide to .630". Ideal for use with 26028 and 26030.CatalogUser 1

COMP Cams 11/32 Arbor (For Cutters) - 4732

This arbor is designed to center a spring seat or valve guide cutter in applications with a 11/32" valve.CatalogUser 1

COMP Cams 16in Degree Wheel - 4791-1

Professional 16" Diameter Machined Aluminum Camshaft Degree WheelUser 1

COMP Cams 6in Dial Calipers - 4908CPG

Dial calipers are a must-have for any hotrodder. These analog dial calipers measure up to 6" in .001" increments and feature smooth thumb rollers, a protective case and a rigid stainless steel body.CatalogUser 1

COMP Cams 6in Extension - 4911CPG

This 6" tip extension for dial indicators allows you to use your dial indicator in tight spaces that require a longer reach.CatalogUser 1

COMP Cams Beehive Spring Micrometer 1.6 - 4930CPG

Accurate to .001", our 1.600"-2.200" range beehive spring mic, is the most precise way to measure installed height. Essential for ensuring seat and open pressures or calculating coil bind, this mic is a must-have for any valvetrain project.CatalogUser 1

COMP Cams CaliBRation Spring For Spring - 5316

Calibrate your miniature valve spring tester (5314) with this calibrated test spring.CatalogUser 1

COMP Cams Cam Checking Tool - 4925CPG

The COMP camhaft checking tool is designed to slide into the lifter bore and ride on the cam lobe. A dial indicator is then attached to the checking tool so that lobe lift and base circle runout can be measured. Fits .842" and .875" bores.CatalogUser 1

COMP Cams Cam Checking Tool For Chrysler - 4926CPG

The COMP camhaft checking tool is designed to slide into the lifter bore and ride on the cam lobe. A dial indicator is then attached to the checking tool so that lobe lift and base circle runout can be measured. Fits .904" bores.CatalogUser 1

COMP Cams Cam Fixture Valve W/Metric A - 4902CPG

This COMP fixture is essential for any engine project where valvetrain measurements are required. Our tool screws into both 1/4"-20 and 6mm valve cover bolt holes and holds a dial indicator for measuring rocker travel.CatalogUser 1

COMP Cams Chrysler Hemi 5.7L/6.1L/6.4L Crank Socket - 4945CPG

COMP Cams Chrysler Hemi 5.7L/6.1L/6.4L Crank Socket