COMP Cams Camshaft Set F4.6 3V XE253L H - 127050

XFI™ No Springs Required 214/227 SOHC Hydraulic Roller Finger Follower Cams for Ford 4.6/5.4L Modular 3V. Great upgrade for stock engine. Solid power gains above 4700 RPM, compatible with stock...

COMP Cams 3V Camshafts - 127020

Mutha' Thumpr™ NSR 234/254 Hydraulic Roller Cams for Ford 4.6/5.4L Modular 3 Valve. Very rough idle, biggest cam for stock heads. Great power above 4900 RPM. Compatible with stock valve...

Comp Cams 4.6/5.4 XE274B - 106460

These are for the most aggressive supercharged setups. The idle will be very choppy and drivability issues are to be expected. Xtreme XE-R S-Charged/N2O 238/240 Hydraulic Roller Finger Follower Cams...

Comp Cams 4.6/5.4 XE270B - 106400

These require 3.73 or 4.10 gears and a 3600 stall if using an automatic trans. Power in a stock engine will be in the 360-370 range with significant tq losses down low.  The idle will be choppy...

Comp Cams 4.6/5.4 XE266B - 106360

These cams are good for a moderate to high power supercahrged or nitrous build.  Expect good power to 7500 with high boost. Can be used in n/a setups also if more peak power is desiredd without...

Comp Cams 4.6/5.4 XE262A - 106300

This is a good cam set for mild setup where a relatively smooth idle and good vacuum is desired. Xtreme Xtreme Energy™-R 226/224 Hydraulic Roller Finger Follower Cams for Ford 4.6/5.4/5.8L...

Comp Cams 4.6/5.4 XE262A - 106100

These are a graet cam set for a mildy modded vehicle that where low and midrange power is desired. With a manual trans and headers you can expect power in the 350rwhp range.   More...

Comp Cams 4.6/5.4 XE278Ah-13 - 102700

These are the most aggressive of the Comp 2v offerings.  4.30-4.56 gears are recommended and if used with an auto trans, a 4k stall or higher will be required.Xtreme Energy™ 242/246...

Comp Cams 4.6/5.4 XE274H-14 - 102300

These are a moderately aggressive cam set for NPI heads due to their .500" lift limit.  We do no recommend these for PI heads.   Xtreme Energy™ 236/240 Hydraulic Roller Finger...

Comp Cams 4.6/5.4 XE268H-14 - 102200

These cams are designed for NPI heads as their lower lift does not result in any valvetrain binding.  They can be used in PI heads, but the power will suffer due having only .500 lift. Xtreme...