Comp Cams 4.6/5.4 Tpx 262HR - 102535

Optimized combination for power and torque with acceptable fuel economy for daily driver or highway cruiser. Requires tuning.   Can use stock springs. Advertised Intake Duration 261 Advertised Exhaust Duration 267 Intake Duration at .050 Inch...

Comp Cams 4.6/5.4 XE262Bh-16 - 102560

Except for their wider LSA, these are the same as the 102500s.  These would be great for a mild supercharger setup where a smooth idle is desired. Xtreme Energy™ Blower 226/230 Hydraulic Roller Finger Follower Cams for Ford 4.6/5.4L Modular 2...

Comp Cams 4.6/5.4 Tpx 248HR - 102525

These cams are great for a very mild, auto trans build with a stock tq converter.   Good MPG can be expected, but with a loss of peak power.  Tq will be maintained and as such, these will be good for a mildy modded truck...

Comp Cams 4.6/5.4 XE262Ah-13 - 102500

These are the best cam set for a mild, mustang street build.  The peak power is similar to the 270s, but midrange power is a lot greater.  Expect a mildly choppy idle. Xtreme Energy™ 226/230 Hydraulic Roller Finger Follower Cams for Ford...

Comp Cams 4.6/5.4 XE268H-14 - 102200

These cams are designed for NPI heads as their lower lift does not result in any valvetrain binding.  They can be used in PI heads, but the power will suffer due having only .500 lift. Xtreme Energy™ 230/236 Hydraulic Roller Finger Follower...

Comp Cams 4.6/5.4 XE270AH-13 - 102600

The are a great cam set for those wanting an increase in upper RPM power without regard to low and midrange losses.  They require 3.73 to 4.10 gears for the best performance.  The idle will be choppy. Xtreme Energy™ 234/238 Hydraulic...

Comp Cams 4.6/5.4 XE274H-14 - 102300

These are a moderately aggressive cam set for NPI heads due to their .500" lift limit.  We do no recommend these for PI heads.   Xtreme Energy™ 236/240 Hydraulic Roller Finger Follower Cams for Ford 4.6/5.4L Modular 2 Valve. Hot...

Comp Cams 4.6/5.4 XE278Ah-13 - 102700

These are the most aggressive of the Comp 2v offerings.  4.30-4.56 gears are recommended and if used with an auto trans, a 4k stall or higher will be required.Xtreme Energy™ 242/246 Hydraulic Roller Finger Follower Cams for Ford 4.6/5.4L...