Product Description
Are you looking for the ultimate 7.3 Godzilla rods for your high output engine project? Molnar Technologies H Beam Ford 7.3 Godzilla rods are machined from billet 4340 steel, and then heat treated to provide improved strength. To make the rods even stronger, they are shot peened to which also increases fatigue life. All Molnar Godzilla 7.3 connecting rods are fitted with highly durable premium bronze bushings for use with floating pin type pistons. Each rod set for the Ford 7.3 Godzilla engines includes Molnar’s proprietary ARP2000 fasteners, lubricant and installation guidelines.
Since the Godzilla engines are capable of very big torque and HP numbers when using boost and or nitrous Molnar makes both the Godzilla Power Adder and the Godzilla Power Adder Plus series connecting rods for this engine to meet the extreme demands of your project.
All Molnar Ford 7.3 connecting rods are finished in the United States at the Molnar Technologies shop in Michigan. Critical rod dimensions are are held to very precise tolerances of +/- .0001 of an inch, which is the tightest tolerance you will find in the performance and racing aftermarket.
Length |
Wt |
Notes |
Jrnl |
Pin |
BE |
PE |
6.319 |
715 |
Godzilla 7.3 Power Adder rods for pistons using .990 diameter wrist pins Designed specifically for use in high output boosted engines using very large nitrous shots and/or, turbocharging or supercharging and high boost pressures. |
2.086 |
.990 |
.978 |
1.010 |